Paper
20 November 2003 Interferometric calibration of microdisplacement actuators
Gian Bartolo Picotto
Author Affiliations +
Abstract
The interferometer set-up in use at IMGC for the calibration of microdisplacement actuators is driven by a computer-based loop control of the out-of-phase between the reference and the measuring signal of the interferometer. In such a way, the displacements are changed in steps of λ of the optical path difference (OPD) and the periodic non-linearity error of the heterodyne interferometer is minimised. Nevertheless, with a double-pass optical configuration a few sampling points are available for the calibration of small displacements in the sub-wavelength range. The non-linearity has a period of λ in terms of optical path change and is due to optical mixing of the two beam frequency components in the two arms of the interferometer. Some methods have been proposed to compensate the optical non-linearity. An approach based on fast phase-shifting to zero-fill the phase difference of the heterodyne beat signals at each sub-wavelength displacement to be measured, is discussed in this contribution. Use is made of a transverse electro-optic modulator for phase shifting the path of the measuring beam of the heterodyne interferometer. The preliminary results shows a significant reduction of the non-linearity in the full sub-wavelength range.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gian Bartolo Picotto "Interferometric calibration of microdisplacement actuators", Proc. SPIE 5190, Recent Developments in Traceable Dimensional Measurements II, (20 November 2003); https://doi.org/10.1117/12.505909
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Interferometers

Actuators

Heterodyning

Interferometry

Electrooptic modulators

Phase shifting

Back to Top