Translator Disclaimer
20 January 2004 Burst Alert Telescope (BAT) instrument response generation
Author Affiliations +
The Burst Alert Telescope (BAT) aboard the Swift Gamma-ray Burst Explorer (scheduled for launch in January 2004) is a coded aperture telescope that includes an array of 32,768 CZT planar detectors, each 4 mm x 4 mm x 2 mm thick. The mobility-lifetime products for holes and electrons are used to characterize the charge transport properties of each detector and were measured during pre-flight calibration tests in early 2003. These values were found to vary over an order of magnitude from detector to detector. In addition to the charge transport models, other more empirical models are used to characterize the remaining components of the response of the BAT array to 15 - 150 keV gamma radiation from any direction in BAT's field-of-view (FOV). The full angular and spectral response of the array as a whole can be parameterized and the spectral response of the instrument over the range of angles and energies can thus be generated in an overall instrument response model. Here we present a preliminary instrument response model and discuss the general characteristics of the detector array. The software to generate the response matrix for BAT is currently under development.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Derek D. Hullinger, Ann M. Parsons, and Goro Sato "Burst Alert Telescope (BAT) instrument response generation", Proc. SPIE 5198, Hard X-Ray and Gamma-Ray Detector Physics V, (20 January 2004);


Back to Top