8 December 2003 Automatic recording system of dynamic spectral response and its applications
Author Affiliations +
Abstract
Spectral response curves of photoemission materials and spectral matching factors between detectors and reflecting spectrum of scenes are of importance in the study of detectors and imaging devices. For studying the two questions an automatic spectral recording system was developed and the schematic diagram of the system was demonstrated in this paper. A lot of experiments by use of the system were made to obtain spectral response curves and characteristic parameters of multi-alkali and GaAs:Cs-O photocathodes during activation procedure and these experimental results were given. It was found that electron affinity of Na2KSb, Na2KSb+Cs and [Na2KSb+Cs]+Sb+Cs multi-alkali photocathodes were 0.70-0.91eV, 0.35-0.41eV and 0.33eV respectively calculated from threshold wavelength of spectral response curves and quantum yield during preparation. On-line spectral response measurements of GaAs:Cs-O reflection-mode photocathodes during activation process and decay procedure were carried. The prepared GaAs:Cs-O reflection-mode photocathodes which used national p-type GaAs substrate can obtain 1025μA/lm sensitivity.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Benkang Chang, Benkang Chang, Xiaoqing Du, Xiaoqing Du, Lei Liu, Lei Liu, Zhiyuan Zong, Zhiyuan Zong, Rongguo Fu, Rongguo Fu, Yunsheng Qian, Yunsheng Qian, } "Automatic recording system of dynamic spectral response and its applications", Proc. SPIE 5209, Materials for Infrared Detectors III, (8 December 2003); doi: 10.1117/12.505113; https://doi.org/10.1117/12.505113
PROCEEDINGS
10 PAGES


SHARE
Back to Top