6 October 2003 Laser cladding of Ni- and Co-based coatings for turbine industry applications
Author Affiliations +
Proceedings Volume 5229, Laser Technology VII: Applications of Lasers; (2003) https://doi.org/10.1117/12.520723
Event: Laser Technology VII: Applications of Lasers, 2002, Szczecin, Poland
Abstract
Laser cladding by means of direct remelting of allow powders Stellite SF6 and Metco 16C was applied for production of protective coatings on chromium steel substrates of composition close to that of the gas turbine blades which operate in extremely aggressive environment. For sample preparation a 1.2 kW cw CO2 laser with powder jet coaxial to the laser beam was used. Compared to previous experiments the controlled preheating of substrate at temperatures around 500-720°C was applied and resulted in crack-free coatings.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rafal Jendrzejewski, Gerard Sliwinski, Ana Conde, Juan J. de Damborenea, "Laser cladding of Ni- and Co-based coatings for turbine industry applications", Proc. SPIE 5229, Laser Technology VII: Applications of Lasers, (6 October 2003); doi: 10.1117/12.520723; https://doi.org/10.1117/12.520723
PROCEEDINGS
6 PAGES


SHARE
Back to Top