Paper
6 October 2003 Surface modification of high-speed steels by diode laser remelting
Boguslaw Major, Wojciech Bochnowski, Andrzej Klimpel, Reinhold Ebner
Author Affiliations +
Proceedings Volume 5229, Laser Technology VII: Applications of Lasers; (2003) https://doi.org/10.1117/12.520713
Event: Laser Technology VII: Applications of Lasers, 2002, Szczecin, Poland
Abstract
Contribution of diode laser remelting of high speed steels of grades: HS 2-10-1-8, HS 6-5-2 and HS 10-2-5-8 on microstructure, chemical composition, hardness and cutting performance was under examinations. Increase of hardness was observed in laser remelted zone in comparison to the conventional heat treated steels. Microanalysis SEM EDS showed differences in chemical composition in chosen regions of not treated and laser treated materials. Laser remelting caused the structure refinement and increase of the wear resistance, however, the cutting performance was diminished in respect to the steels not subject to the laser modification. Residual stresses using X-ray method were measured both in steels after conventional heat treatment and subjected to the laser modification.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Boguslaw Major, Wojciech Bochnowski, Andrzej Klimpel, and Reinhold Ebner "Surface modification of high-speed steels by diode laser remelting", Proc. SPIE 5229, Laser Technology VII: Applications of Lasers, (6 October 2003); https://doi.org/10.1117/12.520713
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Heat treatments

Semiconductor lasers

Laser cutting

Resistance

Scanning electron microscopy

Molybdenum

X-rays

Back to Top