14 August 2003 Polarization-maintaining photonic crystal fibers
Author Affiliations +
Abstract
Photonic crystal fibers (PCFs) confine light by the regularly aligned cladding air-holes. PCFs can produce large birefringence of >10-3 by asymmetrical structures. Since the polarization mode in the slow axis is hard to couple to the fast axis mode due to the large birefringence, such PCFs can be used as polarization maintaining fibers. To induce such anisotropy, some hole patterns can be considered. In this paper, the structures of polarization maintaining PCFs, two defects type and enlarged type are described. In 100 m fiber, the extinction ratio better than -20 dB and -30 dB were obtained for former and latter type PCF, respectively. We have also examined the cross-talk degradation by the bending distortion. In the bending diameter of 10 mm, the cross-talk degradation was no larger than the measurement accuracy of 0.2 dB in such polarization maintaining photonic crystal fibers, but the 20 dB degradation was observed in the PANDA fiber, which was the conventional polarization maintaining fiber.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Akihito Suzuki, Akihito Suzuki, Masatoshi Tanaka, Masatoshi Tanaka, Shunichiro Yamaguchi, Shunichiro Yamaguchi, Moriyuki Fujita, Moriyuki Fujita, Takashi Yamamoto, Takashi Yamamoto, Hirokazu Kubota, Hirokazu Kubota, Satoki Kawanishi, Satoki Kawanishi, } "Polarization-maintaining photonic crystal fibers", Proc. SPIE 5246, Active and Passive Optical Components for WDM Communications III, (14 August 2003); doi: 10.1117/12.511021; https://doi.org/10.1117/12.511021
PROCEEDINGS
9 PAGES


SHARE
Back to Top