26 February 2004 Fabrication of cube beamsplitters for white light interferometry
Author Affiliations +
Abstract
Interferometric applications utilizing short coherence length sources, such as white light interferometry, require precise matching of optical path lengths for the two arms of the interferometer. If a cube beamsplitter element is utilized, the added dispersive material in the optical path could introduce undesirable optical path difference (OPD) effects and a consequent degradation in fringe visibility. For this reason a cube beamsplitter must be well matched for equal geometric path length in glass during the fabrication process. Two degrees of freedom must be controlled; the lateral position and relative rotation of the two prisms that comprise the beamsplitter. A method is described for efficiently assembling cubed beamsplitters utilizing a kinematic mount to adjust the relative position of the beamsplitter prisms with sub-micron precision for both degrees of freedom. The OPD is monitored simultaneously at three separate wavelengths during assembly by exploiting the color separation capabilities of a spatially congruent 3-CCD color camera. Once positioned to minimize the OPD, the prisms are bonded together with UV curing adhesive and any residual aberrations are quantified. The technique was proven by aligning prisms to 0.1μm accuracy and measuring the OPD error to 0.05μm accuracy.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter D. Koudelka, Peter D. Koudelka, James H. Burge, James H. Burge, } "Fabrication of cube beamsplitters for white light interferometry", Proc. SPIE 5252, Optical Fabrication, Testing, and Metrology, (26 February 2004); doi: 10.1117/12.513440; https://doi.org/10.1117/12.513440
PROCEEDINGS
9 PAGES


SHARE
Back to Top