26 February 2004 Manufacturing of optical molds using an integrated simulation and measurement interface
Author Affiliations +
Abstract
The manufacturing of optics is an important field of technology and will serve key-markets in the future. The research activities of the Transregional Collaborative Research Center ”Process Chains for the Replication of Complex Optical Elements” SFB/TR4 of the Universities of Aachen, Bremen and Stillwater (USA) have the objective to lay the scientific foundations for a deterministic and economic mass production of optical components with complex geometries, e.g. aspheric, non-rotational asymmetric or microstructured surfaces eventually superimposed on freeform geometries. The paper presents an approach for an integrated simulation and measurement interface for the analysis of manufacturing effects during the mold making as well as first results of its application on the basis of the manufacturing of mold inserts.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Manfred Weck, Markus Winterschladen, Tilo Pfeifer, Dirk Doerner, Ekkard Brinksmeier, Lutz Autschbach, Oltmann Riemer, "Manufacturing of optical molds using an integrated simulation and measurement interface", Proc. SPIE 5252, Optical Fabrication, Testing, and Metrology, (26 February 2004); doi: 10.1117/12.513564; https://doi.org/10.1117/12.513564
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

Optical Fabrication Technology, The Present and Future
Proceedings of SPIE (December 09 1983)
Finish machining of optical components in mass production
Proceedings of SPIE (March 01 1991)
Generating, Grinding And Figuring Advanced Optical Elements
Proceedings of SPIE (October 13 1986)
Precision Diamond Machined Optics
Proceedings of SPIE (March 31 1982)
Diamond machining of flats, spherics, and aspherics
Proceedings of SPIE (October 01 1990)

Back to Top