2 September 2003 Design of novel part-compensating lens used in aspheric testing
Author Affiliations +
Proceedings Volume 5253, Fifth International Symposium on Instrumentation and Control Technology; (2003); doi: 10.1117/12.521761
Event: Fifth International Symposium on Instrumentation and Control Technology, 2003, Beijing, China
Abstract
A novel aspheric surface testing method using part-compensating lens is presented in this paper. Researches are made to the specific design requirement and design method of part-compensating lens. The design requirement is applied in the optimization design of the part-compensating lens to three kinds of aspheric surfaces, and it is proved that the structure of part-compensating lens is much simpler than that of null compensator. Analysis is made about the asphericity compensation range of each part-compensating lens, some range can be 30 λ. The results demonstrate that aspheric surfaces with different relative aperture and asphericity can be compensated by part-compensating lens that is simple and easily fabricated, and the shape error of aspheric surfaces can be measured.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Huilan Liu, Qiudong Zhu, Qun Hao, Dingguo Sha, "Design of novel part-compensating lens used in aspheric testing", Proc. SPIE 5253, Fifth International Symposium on Instrumentation and Control Technology, (2 September 2003); doi: 10.1117/12.521761; https://doi.org/10.1117/12.521761
PROCEEDINGS
5 PAGES


SHARE
KEYWORDS
Aspheric lenses

Lens design

Monochromatic aberrations

Wavefronts

Charge-coupled devices

Mirrors

Interferometers

RELATED CONTENT

Retrace error: interferometry's dark little secret
Proceedings of SPIE (October 15 2013)
Aspheric Measurement Using Phase-Shifting Interferometry
Proceedings of SPIE (January 01 1987)
Diffractive null lens for parabolic mirrors
Proceedings of SPIE (September 09 2010)
Imaging aberrations from null correctors
Proceedings of SPIE (November 27 2007)
Vector Aberration Theory And The Design Of Off-Axis Systems
Proceedings of SPIE (February 14 1986)
Optical alignment with computer-generated holograms
Proceedings of SPIE (September 21 2007)

Back to Top