2 September 2003 Three-dimensional shape measurement system using optical spatial modulator and zoom camera
Author Affiliations +
Proceedings Volume 5253, Fifth International Symposium on Instrumentation and Control Technology; (2003) https://doi.org/10.1117/12.521824
Event: Fifth International Symposium on Instrumentation and Control Technology, 2003, Beijing, China
Abstract
An automatic measurement system of three-dimensional shapes by a projection method with striped patterns from an optical spatial modulator has been developed. Patterns on the surface of the object were taken into a computer by a CCD camera, and the 3D cocordinate of the surface of the object was calculated according to a principle of a trigonometry measurement. This system has the following advantages. (1) It is possible to capture the surface topography without any contact. (2) The time required for the measurements is shorter than the light-section method. (3) The optical spatial modulator using a liquid crystal projector is possible to control the striped patterns accurately by the computer. (4) It is possible to measure precisely and to expand the measurement area using a zoom camera. In this study, we developed the method with using zooming of a CCD camera image. By using zooming of a CCD camera image, the measurement accuracy improved and the measurement range was expandable.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Katsumi Tsujioka, Jing-Nan Liu, Yoshihisa Uchida, Kazuo Hatano, Shuntaro Higa, Hideo Furuhashi, and Yoshiyuki Uchida "Three-dimensional shape measurement system using optical spatial modulator and zoom camera", Proc. SPIE 5253, Fifth International Symposium on Instrumentation and Control Technology, (2 September 2003); doi: 10.1117/12.521824; https://doi.org/10.1117/12.521824
PROCEEDINGS
4 PAGES


SHARE
Advertisement
Advertisement
Back to Top