30 September 2003 Development of a novel translation micromirror for adaptive optics
Author Affiliations +
Proceedings Volume 5264, Optomechatronic Systems IV; (2003) https://doi.org/10.1117/12.515063
Event: Photonics Technologies for Robotics, Automation, and Manufacturing, 2003, Providence, RI, United States
Conventional translation micromirrors for adaptive optics use attractive electrostatic force and therefore have two limitations: 1) the stroke is limited to less than one third of the initial gap distance between the mirror plate and the substrate. Normally the stroke is in the range of submicrometers; 2) stiction happens during operation. A novel translation micromirror, which uses a repulsive electrostatic force, is presented in this paper. This novel translation micromirror completely overcomes the limitations associated with conventional translation micromirrors and its stroke is not limited by the initial gap distance between the mirror plate and the substrate and therefore is able to achieve a much larger vertical stroke to modulate lights over a wider spectrum than that achieved by conventional translation micromirrors. The novel translation micromirror has no stiction problem and is highly compatible with mature surface micromachining technology. An analytical model is derived for the novel translation micromirror and prototypes are fabricated. The prototype of the novel translation micromirror, which is deliberately not optimized so it could be fabricated using MUMPS, achieved a vertical stroke of 1.75μm using a driving voltage of 50 volts, which is three times the stroke of conventional MUMPS translation micromirrors. It is expected that if standard surface micromachining is used instead of MUMPs, the design of the novel translation micromirror can be optimized and a much larger vertical stroke can be achieved.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Siyuan He, Siyuan He, Ridha Ben Mrad, Ridha Ben Mrad, } "Development of a novel translation micromirror for adaptive optics", Proc. SPIE 5264, Optomechatronic Systems IV, (30 September 2003); doi: 10.1117/12.515063; https://doi.org/10.1117/12.515063


Back to Top