12 May 2004 Full metal organic microcavity emitting device
Author Affiliations +
Proceedings Volume 5280, Materials, Active Devices, and Optical Amplifiers; (2004) https://doi.org/10.1117/12.521639
Event: Asia-Pacific Optical and Wireless Communications, 2003, Wuhan, China
A red emitting microcavity device with a multiple layer of Glass/DBR/Ag/NPB/DCM:Alq3/ Alq3/LiF/Al was fabricated. Comparing with device of Glass/ITO/NPB/DCM: Alq3/ Alq3/LiF/Al, the spectrum of the microcavity device was narrowed from 67nm to 27nm and the peak intensity was increased by a factor of 2.5, while the current density was one eighth of that of non-cavity device at the same bias voltage. By inserting an Ag layer between ITO and NPB the current intensity was sharply enhanced about three times and because of weak cavity effects the spectrum changed largely.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chunyu Zhang, Chunyu Zhang, Fengying Ma, Fengying Ma, Yongqiang Ning, Yongqiang Ning, Yun Liu, Yun Liu, Xingyuan Liu, Xingyuan Liu, Li Qin, Li Qin, Changqin Jin, Changqin Jin, Lijun Wang, Lijun Wang, } "Full metal organic microcavity emitting device", Proc. SPIE 5280, Materials, Active Devices, and Optical Amplifiers, (12 May 2004); doi: 10.1117/12.521639; https://doi.org/10.1117/12.521639

Back to Top