7 June 2004 Gain calculation for Er/Yb-doped fiber amplifiers
Author Affiliations +
Proceedings Volume 5335, Fiber Lasers: Technology, Systems, and Applications; (2004) https://doi.org/10.1117/12.524810
Event: Lasers and Applications in Science and Engineering, 2004, San Jose, Ca, United States
Gain and output power as a function of pump power has been calculated for short Er/Yb doped single mode fibers for various fiber parameters. The calculation shows (i) small signal gain increases with increasing Er concentration, (ii) long fiber lengths provide both higher gain and higher output, (iii) calculated gain is larger for higher Er emission cross section, and, (iv) >25 dB gain is feasible for 5 cm long fiber for Er and Yb concentrations of 3 X 1026 m-3 and 1.2 X 1027 m-3.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qiang Wang, Qiang Wang, Robert G. Ahrens, Robert G. Ahrens, Niloy K. Dutta, Niloy K. Dutta, "Gain calculation for Er/Yb-doped fiber amplifiers", Proc. SPIE 5335, Fiber Lasers: Technology, Systems, and Applications, (7 June 2004); doi: 10.1117/12.524810; https://doi.org/10.1117/12.524810


Experimental and numerical analysis of high power Er Yb co...
Proceedings of SPIE (February 21 2017)
Optical gain of single-mode short Er/Yb doped fibers
Proceedings of SPIE (October 24 2004)
Er-Yb-doped double-clad fiber amplifier
Proceedings of SPIE (August 13 2003)
Characterization and modeling of Er/Yb-codoped fibers
Proceedings of SPIE (December 28 1999)
Er-Yb double-clad fiber amplifier
Proceedings of SPIE (July 10 2002)

Back to Top