Fabrication of an electrochemical tip-probe system embedded in SiNx cantilevers for simultaneous SECM and AFM analysis

Rainer J. Fasching; Yao Tao; Fritz B. Prinz

doi:10.1117/12.524452

30 December 2003 Fabrication of an electrochemical tip-probe system embedded in SiNx cantilevers for simultaneous SECM and AFM analysis

Rainer J. Fasching, Yao Tao, Fritz B. Prinz

Author Affiliations +

Proceedings Volume 5342, Micromachining and Microfabrication Process Technology IX; (2003) https://doi.org/10.1117/12.524452
Event: Micromachining and Microfabrication, 2004, San Jose, California, United States

Abstract

An electrochemical transducer system embedded in silicon nitride cantilevers has been fabricated for simultaneous Scanning Electrochemical Microscopy (SECM) and Atomic Force Microscopy (AFM) analysis. Sharpened high-aspect ratio silicon tips are shaped combining isotropic and anisotropic deep-reactive etch processes and form the body of the transducer. Deposition of a silicon nitride followed by a back-etch step allows embedding these silicon tips in a silicon nitride layer so that they protrude through the nitride. This way, embedded silicon tips with a diameter smaller than 600 nm, a radius smaller than 50 nm, and an aspect ratio higher than 20 can be achieved. Subsequently, a platinum layer and an insulator layer are deposited on these tip structures. Introducing a metal masking technology utilizing Focused Ion Beam (FIB) technology, a precise exposure of the buried metal layer can be achieved to form ultra-micro electrodes on top of the tip. Finally, cantilever structures are shaped and released by etching the silicon substrate from the backside. Electrochemical and impedance spectroscopic characterization show electrochemical functionality of the transducer system. Due to the high aspect ratio topography of the tip structure and low spring constant of silicon nitride cantilevers, these probes are particularly suited for high resolution SECM and AFM analysis. Furthermore, this technology allows a production of both linear probe-arrays and two-dimensional probe-arrays.

Citation Download Citation

Rainer J. Fasching, Yao Tao, and Fritz B. Prinz "Fabrication of an electrochemical tip-probe system embedded in SiNx cantilevers for simultaneous SECM and AFM analysis", Proc. SPIE 5342, Micromachining and Microfabrication Process Technology IX, (30 December 2003); https://doi.org/10.1117/12.524452

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available