24 January 2004 Piezoelectric microflextensional actuator
Author Affiliations +
Proceedings Volume 5344, MEMS/MOEMS Components and Their Applications; (2004) https://doi.org/10.1117/12.524817
Event: Micromachining and Microfabrication, 2004, San Jose, California, United States
Abstract
This paper presents a novel micro flextensional actuator design consisting of bulk PZT bonded to a silicon microbeam. The fabrication process includes boron doping, EDP etching, dicing, and bonding to produce actuators with large displacements (8.7 μm) and gain factors (32) at 100V. The theoretical model predicts that a thin beam with properly designed initial imperfection maximizes the actuator displacement and gain factor. For large PZT displacement, small imperfection maximizes gain factor but may not gaurantee, the desired (up or down) displacement direction. For small PZT displacement, large initial imperfection improves performance and guarantees displacement in the (desired) direction of the initial imperfection. The theoretical model, based on the measured initial beam shape, predicts the experimentally measured direction and magnitude of beam displacement for two devices.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jongpil Cheong, Jongpil Cheong, Srinivas A. Tadigadapa, Srinivas A. Tadigadapa, Christopher D Rahn, Christopher D Rahn, } "Piezoelectric microflextensional actuator", Proc. SPIE 5344, MEMS/MOEMS Components and Their Applications, (24 January 2004); doi: 10.1117/12.524817; https://doi.org/10.1117/12.524817
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Tradeoffs in MEMS materials
Proceedings of SPIE (September 22 1996)
Pneumatically actuated micropipetting device
Proceedings of SPIE (March 25 1998)
Realization of vertical P+ wall through-wafer
Proceedings of SPIE (December 29 2003)

Back to Top