20 May 2004 Development of phase shift masks for extreme ultraviolet lithography and optical evaluation of phase shift materials
Author Affiliations +
Abstract
Phase Shift Masks (PSM) for Extreme Ultraviolet Lithography (EUVL) have the potential for extending the lithographic capability of EUVL beyond the 32-nm node. The concept of EUV PSM structures can be implemented either by adding absorber structures on top of the Mo/Si multilayers (additive approach) or by partial etching into the multilayers (subtractive approach). Among many technical challenges, evaluating optical constants of absorber materials is the most important issue particularly for PSM by the additive approach (PSM-ADD), while the etch stop capability and the etch selectivity with vertical sidewall profile are the main technical challenges for PSM fabricated by the subtractive method (PSM-SUB). For fast turn around of PSM development, the indirect optical constant evaluation through material analysis is a useful metrology technique. The optical constant of TaSiN extracted from Rutherford Backscattering Spectroscopy (RBS) data agrees well with that obtained from the direct measurement by transmission interferometric technique. For PSM-SUB, the concept of embedding B4C and NiFe etch stop layer (ESL) is verified by measuring reflectivity of the ESL embedded substrates and demonstrating good etch stop capability.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sang-In Han, Sang-In Han, Eric Weisbrod, Eric Weisbrod, James R. Wasson, James R. Wasson, Rich Gregory, Rich Gregory, Qianghua Xie, Qianghua Xie, Pawitter J. S. Mangat, Pawitter J. S. Mangat, Scott D. Hector, Scott D. Hector, William J. Dauksher, William J. Dauksher, Kristine M. Rosfjord, Kristine M. Rosfjord, } "Development of phase shift masks for extreme ultraviolet lithography and optical evaluation of phase shift materials", Proc. SPIE 5374, Emerging Lithographic Technologies VIII, (20 May 2004); doi: 10.1117/12.535503; https://doi.org/10.1117/12.535503
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

Cr absorber mask for extreme-ultraviolet lithography
Proceedings of SPIE (January 22 2001)
Phase-shift mask for EUV lithography
Proceedings of SPIE (March 23 2006)
EUVL mask with Ru ML capping
Proceedings of SPIE (December 17 2003)
Novel absorber materials for EUV lithography mask
Proceedings of SPIE (May 11 2009)

Back to Top