A new analysis strategy for CD metrology using rapid photo goniometry method

Jerome Petit; Pierre Barritault; Jerome Hazart; Patrick Chaton; Pierre Boher; Mathieu Luet; Thierry Leroux

doi:10.1117/12.533031

24 May 2004 A new analysis strategy for CD metrology using rapid photo goniometry method

Jerome Petit, Pierre Barritault, Jerome Hazart, Patrick Chaton, Pierre Boher, Mathieu Luet, Thierry Leroux

Author Affiliations +

Proceedings Volume 5375, Metrology, Inspection, and Process Control for Microlithography XVIII; (2004) https://doi.org/10.1117/12.533031
Event: Microlithography 2004, 2004, Santa Clara, California, United States

Abstract

In the present paper, we use a new photo goniometric method capable to measure the entire diffracted pattern of a sub micron grating at fixed wavelength very rapidly. The complete reflectance pattern is obtained versus incidence angle (0-80°) and azimuth angle (0-360°). Regression software based on RCWA simulations has been developed. It is used to adjust automatically the grating profile with an unprecedented rapidity. Regressions have been applied to our polarimetric measurements versus incidence angle θ and versus azimuth angle φ. Results are compared to those provided by spectroscopic ellipsometry (SE) and scanning electron microscopy (SEM). We show that fixed incidence angle specular reflection coefficients versus azimuth angle R(φ) curves are very sensitive to the profiles especially when the CD is reduced mainly because of the occurrence of diffracted orders matching the CD at given azimuths even if the wavelength is much larger than the CD. Mid space illumination measurements in a large angular aperture (0<θ<80° and 0<φ<180°) can be also used to deduce profile information. We show that specular reflection coefficients can be fitted in the entire angular aperture to provide precise structural shapes. Out of specular contribution which is measured simultaneously can also be used in the analysis. We show that it is more sensitive to the grating imperfections than the specular contribution.

Citation Download Citation

Jerome Petit, Pierre Barritault, Jerome Hazart, Patrick Chaton, Pierre Boher, Mathieu Luet, and Thierry Leroux "A new analysis strategy for CD metrology using rapid photo goniometry method", Proc. SPIE 5375, Metrology, Inspection, and Process Control for Microlithography XVIII, (24 May 2004); https://doi.org/10.1117/12.533031

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE