24 May 2004 Electrical defect SEM review under the various electric circumstances on SAC layer
Author Affiliations +
Abstract
Traditionally the defects, detected by inspection tools (optic & EBI), have been reviewed through DR-SEM or CD-SEM. Nevertheless, when physical defects are characterized using conventional in-line SEM it is hard to re-detect electrical defects because of the restricted working range in e-beam control. To detect and review electrical defects on contact layer EBI tools were used due to the in-line SEM limitation on electrical defect reviews. However the quality of the image was not acceptable to characterize type of defects due to its low resolution (20~30nm). In this article, the review condition of electrical defect was studied under the various electric conditions on Self Align Contact (SAC) layer. In order to achieve the optimum condition, a wide range of negative and positive conditions were applied using acceleration voltage, I-probe current, cap voltage and scan rate. Under stable weak negative charge conditions, 100% review of electrical and contact bottom defects were achieved. Furthermore, we found the high I-probe current and the appropriate acceleration voltage are main factors which increase the capability to re-detect the electrical defect. In this article, we figure out which defect is electrical defect and non-electrical defect applying to diverse electric conditions on the wafer.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tae Yong Lee, Tae Yong Lee, Nam-Koong Whan, Nam-Koong Whan, Byoung Ho Lee, Byoung Ho Lee, Soo-Bok Chin, Soo-Bok Chin, Do Hyun Cho, Do Hyun Cho, Jong Il Choi, Jong Il Choi, Seo Shik Hur, Seo Shik Hur, Ki Hwa Ko, Ki Hwa Ko, Jeong-Ho Yeo, Jeong-Ho Yeo, } "Electrical defect SEM review under the various electric circumstances on SAC layer", Proc. SPIE 5375, Metrology, Inspection, and Process Control for Microlithography XVIII, (24 May 2004); doi: 10.1117/12.534494; https://doi.org/10.1117/12.534494
PROCEEDINGS
6 PAGES


SHARE
Back to Top