Study of 3D metrology techniques as an alternative to cross-sectional analysis at the R&D level

Johann Foucher; Kirk Miller

doi:10.1117/12.534104

24 May 2004 Study of 3D metrology techniques as an alternative to cross-sectional analysis at the R&D level

Johann Foucher, Kirk Miller

Author Affiliations +

Proceedings Volume 5375, Metrology, Inspection, and Process Control for Microlithography XVIII; (2004) https://doi.org/10.1117/12.534104
Event: Microlithography 2004, 2004, Santa Clara, California, United States

Abstract

The decrease in critical dimension (CD) of integrated circuits (IC) always challenges metrology tools capabilities. In less than ten years we will reach the limit of CMOS technology with typical printed gate length less than 20 nm and physical gate length of less than 15nm. Advanced R&D departments must already address today all the issues related to so small devices otherwise the roadmap requirements would not be fulfilled. Indeed most of the issues are directly related to metrology capabilities such as precise control of the shape of etched features, sidewall roughness, wafer CD uniformity, and mask inspection (. . .). All these parameters will represent a bottleneck for advanced patterning if metrology tools are unable to measure them with a precision better than few nanometers. In this paper we show that 3D metrology is mandatory to succeed in reaching future roadmap requirements. We address in details the CD AFM technique capabilities which is a potential candidate for advanced patterning metrology. The experimental data are compared with today’s reference: cross-sectional analysis (X-SEM). We also discuss on other techniques such as scatterometry and top view CD-SEM which are also candidates for 3D metrology.

Citation Download Citation

Johann Foucher and Kirk Miller "Study of 3D metrology techniques as an alternative to cross-sectional analysis at the R&D level", Proc. SPIE 5375, Metrology, Inspection, and Process Control for Microlithography XVIII, (24 May 2004); https://doi.org/10.1117/12.534104

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE