Beam quality of a new-type MOPO laser system for VUV laser lithography

Osamu Wakabayashi; Tatsuya Ariga; Takahito Kumazaki; Koutarou Sasano; Takayuki Watanabe; Takayuki Yabu; Tsukasa Hori; Kouji Kakizaki; Akira Sumitani; Hakaru Mizoguchi

doi:10.1117/12.536241

28 May 2004 Beam quality of a new-type MOPO laser system for VUV laser lithography

Osamu Wakabayashi, Tatsuya Ariga, Takahito Kumazaki, Koutarou Sasano, Takayuki Watanabe, Takayuki Yabu, Tsukasa Hori, Kouji Kakizaki, Akira Sumitani, Hakaru Mizoguchi

Author Affiliations +

Proceedings Volume 5377, Optical Microlithography XVII; (2004) https://doi.org/10.1117/12.536241
Event: Microlithography 2004, 2004, Santa Clara, California, United States

Abstract

ArF-dry microlithography is currently switching from pre-production to mass-production and the target node is shifted from 90 nm to 65 nm. ArF-wet or F₂ laser lithography will then be an important player for the next generation node below 45 nm. Therefore, high throughput and high-resolution exposure tools for VUV lithography require VUV light sources (ArF and F₂ lasers) with high power and narrow bandwidth. In this paper, we describe the beam quality of the new- type injection lock (MOPO, master oscillator power oscillator) ArF laser system we developed and compare it with the beam quality of a master oscillator power amplifier (MOPA) ArF laser system. A high power and narrow bandwidth ArF laser can be achieved with twin laser chambers in a MOPA or an injection lock laser configuration. Compared to the MOPA system, the injection lock laser system has an excellent performance (e.g. high efficiency, long pulse duration and narrow spectrum). On the other hand, the injection lock system has some disadvantages in beam quality showing high spatial coherence, broadband emission and having a beam profile with a hole. These technical issues have been solved, however, with the following two new breakthrough-technologies: (1) a new-type injection lock system having low spatial coherence and a beam profile with no hole and (2) the optimization of the injection seed energy and discharge timing between the twin chambers for low broadband emission. The spatial coherence, the broadband spectrum and the beam profile of the new-type injection lock system were measured with a Young’s interferometer, a wide range spectrometer with etalons and a 2-dimensional beam profiler, respectively. The new-type injection lock ArF laser system had a lower spatial coherence than a conventional injection lock system, a very low broadband emission level thus preventing deterioration of exposure tools resolution, and a beam profile with no hole. Moreover, we reconfirmed that the new-type injection lock system has the same excellent performance as the conventional injection lock system.

Citation Download Citation

Osamu Wakabayashi, Tatsuya Ariga, Takahito Kumazaki, Koutarou Sasano, Takayuki Watanabe, Takayuki Yabu, Tsukasa Hori, Kouji Kakizaki, Akira Sumitani, and Hakaru Mizoguchi "Beam quality of a new-type MOPO laser system for VUV laser lithography", Proc. SPIE 5377, Optical Microlithography XVII, (28 May 2004); https://doi.org/10.1117/12.536241

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available