Translator Disclaimer
28 May 2004 Gray assist bar OPC
Author Affiliations +
Assist bar Optical Proximity Correction (OPC) has been demonstrated to increase across pitch performance and depth-of-focus of semi-dense to isolated lines. As the sub-resolution assist feature (SRAF) or assist bar's size increases, so does its desired lithographic effect, as well as its undesired printability. In other words, when large assist features are required at isolated pitches, the assist features may print. A frequency-preserving assist bar solution is the most preferred one, but difficult to realize for opaque assist features due to printability. The concept of frequency-preserving Gray Assist Bar OPC has been introduced as a method to extend imaging performance for small features across a wide rage of duty ratios. In this paper, we will present the experimental validation of this concept. The Gray Assist Bar mask was manufactured using a two-level lithography process, and the optical properties have been characterized using a Woollam VUV VASE system. Additional metrology was performed using an AFM (SNP9000) and CD SEM (KLA8250XR). Exposures on a 0.75NA 193nm scanner clearly show the expected effects. The use of the Gray Assist Bar features reduces the through pitch critical dimension (CD) variations significantly and can hence be regarded as an "Optical Proximity Correction". The isofocal inflection point of aerial images is shifted in cases with Gray Assist Bars, resulting in flatter bossung curves and a larger depth of focus (DOF) for the various features through pitch at their target size. This results in larger overlapping process windows. The Gray Assist Bars has also shown a very low printability, even with aggressive off-axis illumination (OAI) settings.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Neal Vincent Lafferty, Geert Vandenberghe, Bruce W. Smith, Matthew Lassiter, and Patrick M. Martin "Gray assist bar OPC", Proc. SPIE 5377, Optical Microlithography XVII, (28 May 2004);


Your worst nightmare inspection of aggressive OPC on 14nm...
Proceedings of SPIE (September 22 2013)
KrF lithography for 130 nm
Proceedings of SPIE (July 04 2000)
Fast inverse lithography technology
Proceedings of SPIE (March 14 2006)
What makes a coherence curve change?
Proceedings of SPIE (May 11 2005)

Back to Top