Swing curve prediction from reflectance spectra: a new method to predict optimal resist thicknesses and compare processes

David H. Ziger

doi:10.1117/12.544237

28 May 2004 Swing curve prediction from reflectance spectra: a new method to predict optimal resist thicknesses and compare processes

David H. Ziger

Author Affiliations +

Proceedings Volume 5377, Optical Microlithography XVII; (2004) https://doi.org/10.1117/12.544237
Event: Microlithography 2004, 2004, Santa Clara, California, United States

Abstract

A new general method to predict resist maxima and minima of linewidth swing curves using UV reflectance spectra near the actinic wavelength is proposed. In this technique, the reflectance spectra in the vicinity of the exposure wavelength are used to determine the effective phase shift due to the underlying substrate. With this parameter, resist thicknesses yielding minima and maxima linewidths can be predicted. In principal, resist minima and maxima can be determined from the UV spectra of a single wafer. This technique was used to predict minima and maxima on both simple (bare silicon) and multifilm (polybuffer LOCOS and gate) stacks for 2 different resists, with and without topography. Three of the film stacks included a top antireflecting coating. Results were compared with swing curves determined from measured linewidths versus resist thicknesses. In general, predicted resist maxima and minima were within 50 Angstroms of the corresponding values measured from linewidths which was well within the experimental error. Additionally, the peak height of the reflectance spectra in the vicinity of the actinic wavelength was generally correlated to linewidth swing determined from multiple wafers. This implies that process stability with respect to cd swing can be compared directly from reflectance spectra. Theoretically, results determined from a nearly normal incident UV reflectometer require a correction to account for the finite NA of the lens. Simulation was used to determine this correction. However, two different simulation programs (Prolith 6.0 and Solid C 6.3) overcorrected the case of an i-line stepper with 0.63NA and 0.65 partial coherence. In this case, agreement with experiment was better with a "half" correction determined from simulation.

Citation Download Citation

David H. Ziger "Swing curve prediction from reflectance spectra: a new method to predict optimal resist thicknesses and compare processes", Proc. SPIE 5377, Optical Microlithography XVII, (28 May 2004); https://doi.org/10.1117/12.544237

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE