Paper
29 July 2004 RF MEMS capacitive switch with isolation valley at lower frequency band
Chang won Jung, Bahram Ghodsian, Bedri A Cetiner, Franco De Flaviis
Author Affiliations +
Abstract
Micro-fabricated RF-MEMS shunt switches on microwave printed circuit boards (PCB) with high dielectric materials are presented. The copper oxide is used as the switch's dielectric layer. The use of copper oxide has a couple of advantages. Firstly, the high dielectric constant of copper oxide (εr≈18.1) provides higher down state capacitance, which can re-position the isolation valley at the lower frequency band. Secondly, the fabrication steps to grow copper oxide layer becomes relatively straightforward as opposed to the deposition of silicon nitride. To improve the switching performance by achieving a desirable high capacitance ratio, the down state capacitance must be as high as possible. The down state capacitance and capacitance ratio of copper oxide is found to be higher than with silicon nitride for the same size of overlapping area, between membrane and bottom electrode. A switch with copper oxide is shown to have a lower isolation valley frequency as opposed to that with a silicon nitride layer.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chang won Jung, Bahram Ghodsian, Bedri A Cetiner, and Franco De Flaviis "RF MEMS capacitive switch with isolation valley at lower frequency band", Proc. SPIE 5389, Smart Structures and Materials 2004: Smart Electronics, MEMS, BioMEMS, and Nanotechnology, (29 July 2004); https://doi.org/10.1117/12.540227
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Copper

Switches

Oxides

Dielectrics

Silicon

Capacitance

Microelectromechanical systems

RELATED CONTENT

Material selection methodology for RF MEMS switch design
Proceedings of SPIE (November 17 2021)
CMOS-compatible RF MEMS switch
Proceedings of SPIE (August 16 2004)
A study on high isolation RF MEMS switch
Proceedings of SPIE (February 07 2006)

Back to Top