29 July 2004 Film sensor using carbon particles for monitoring integrity of steel structures
Author Affiliations +
Abstract
The authors have developed such sensors which can be applied to steel structures for health monitoring. The sensor is manufactured by placing copper foils (electrodes) on polymer film and splaying the electrically conductive material on the surface. The electrically conductive material is composed of resin and carbon particles. Carbon particles form a continuous link each other. The strain due to the deformation of the steel members influences the electrical resistance. We can evaluate the strain of the steel members by measuring changing rate of the electric resistance, and then estimate the damages of the steel members. A strain monitoring system with this sensor enables low cost, because it does not need special equipment except for an electrical resistance meter. The authors carried out experimental tests on steel structure specimens with the film sensor attached. The specimens were beam-to-column connections of steel structures buildings subjected to alternative cyclic deformation correspond to input by severe earthquakes. Based on the tests, we investigated the performance and applicability of the sensor for the members of steel structures. As the test results, it turned out that the sensor is able to be used for strain detecting of steel structures.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takehiko Terada, Takehiko Terada, Keiji Shiba, Keiji Shiba, Makoto Suzuki, Makoto Suzuki, Minoru Sugita, Minoru Sugita, Hideaki Matsubara, Hideaki Matsubara, } "Film sensor using carbon particles for monitoring integrity of steel structures", Proc. SPIE 5391, Smart Structures and Materials 2004: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, (29 July 2004); doi: 10.1117/12.539608; https://doi.org/10.1117/12.539608
PROCEEDINGS
9 PAGES


SHARE
Back to Top