Paper
2 April 2004 Research of conditions of formation of local refractive index change on a surface of a porous glass substrate by CO2 laser radiation with the greatest possible radiuses of curvature
Dmitry V. Petrov, Vadim P. Veiko, Galina K. Kostjuk, Evgeny B. Yakovlev, Tatiana V. Antropova
Author Affiliations +
Proceedings Volume 5399, Laser-Assisted Micro- and Nanotechnologies 2003; (2004) https://doi.org/10.1117/12.552766
Event: Laser-Assisted Micro- and Nanotechnologies 2003, 2003, St. Petersburg, Russian Federation
Abstract
Kinetics of sintering of porous glass (further PG) plates of composition 96SiO2 • 3.8 B2O3 • 0.2Na2O (a pier. %) has been explored in these researches. The sintering was carried out under activity of CO2-laser radiation. Wavelength of CO2-laser (λ = 10.6 μm) lies in the range of majority absorption of a silica glass. Definition of making requirements of thin sintered layer with the greatest possible radiuses of curvature was the purpose of researches. Also in researches, the purpose to receive the positive microoptical device (further MOD) from the initial negative MOD has been put. Researches have been made at change of action time (further τ) and a stationary value of a power density of radiation (further q), and also at change q and constant τ.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dmitry V. Petrov, Vadim P. Veiko, Galina K. Kostjuk, Evgeny B. Yakovlev, and Tatiana V. Antropova "Research of conditions of formation of local refractive index change on a surface of a porous glass substrate by CO2 laser radiation with the greatest possible radiuses of curvature", Proc. SPIE 5399, Laser-Assisted Micro- and Nanotechnologies 2003, (2 April 2004); https://doi.org/10.1117/12.552766
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Refractive index

Carbon monoxide

Optical components

Absorption

Gas lasers

Manufacturing

RELATED CONTENT

Fluorescence of mitigated laser damage in fused silica
Proceedings of SPIE (February 21 2005)
Athermal glass by design
Proceedings of SPIE (September 15 2007)
High Transmittance Long Fiber Optics
Proceedings of SPIE (October 01 1968)

Back to Top