Paper
28 May 2004 Etching mechanism of Au thin films in Cl2/Ar inductively coupled plasma
Author Affiliations +
Proceedings Volume 5401, Micro- and Nanoelectronics 2003; (2004) https://doi.org/10.1117/12.557250
Event: Micro- and Nanoelectronics 2003, 2003, Zvenigorod, Russian Federation
Abstract
In this work, we investigated both etching characteristics and mechanisms of Au thin films using Cl2/Ar gas mixture in an inductively coupled plasma (ICP) system. For these purposes, a combination of experimental methods and modeling was used. It was found that an increase in Ar mixing ratio under constant operating conditions causes non-monotonic behavior of Au etch rate, which reaches a maximum 80% Ar. A study of surface composition using X-ray photoelectron spectroscopy (XPS) showed that the etching in chlorine-rich plasma is escorted by accumulation of AuClx on the etched surfaces. Langmuir probe measurements indicated a noticeable sensitivity of both electron temperature and electron density to the change of Ar mixing ratio while 0-dimensional model of volume kinetics showed monotonic change of both densities and fluxes of active species such as chlorine atoms and positive ions. However, analyses of surface kinetics showed that the non-monotonic etch rate behavior may be produced by the concurrence of physical and chemical pathways in ion-assisted chemical reaction.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alexander Efremov, Vladimir Svettsov, and Chang-Il Kim "Etching mechanism of Au thin films in Cl2/Ar inductively coupled plasma", Proc. SPIE 5401, Micro- and Nanoelectronics 2003, (28 May 2004); https://doi.org/10.1117/12.557250
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Plasma

Argon

Gold

Chlorine

Ions

Thin films

Back to Top