InGaAsP/InP quantum-well electrorefractive modulators with sub-volt Vpi

Paul W. Juodawlkis; Frederick J. O'Donnell; Robert J. Bailey; Jason J. Plant; Kevin G. Ray; Douglas C. Oakley; Antonio Napoleone; Michael R. Watts; Gary E. Betts

doi:10.1117/12.546786

3 August 2004 InGaAsP/InP quantum-well electrorefractive modulators with sub-volt Vpi

Paul W. Juodawlkis, Frederick J. O'Donnell, Robert J. Bailey, Jason J. Plant, Kevin G. Ray, Douglas C. Oakley, Antonio Napoleone, Michael R. Watts, Gary E. Betts

Author Affiliations +

Proceedings Volume 5435, Enabling Photonic Technologies for Aerospace Applications VI; (2004) https://doi.org/10.1117/12.546786
Event: Defense and Security, 2004, Orlando, Florida, United States

Abstract

Advanced analog-optical sensor, signal processing and communication systems could benefit significantly from wideband (DC to > 50 GHz) optical modulators having both low half-wave voltage (Vpi) and low optical insertion loss. An important figure-of-merit for modulators used in analog applications is Tmax/Vpi, where Tmax is the optical transmission of the modulator when biased for maximum transmission. Candidate electro-optic materials for realizing these modulators include lithium niobate (LiNbO3), polymers, and semiconductors, each of which has its own set of advantages and disadvantages. In this paper, we report the development of 1.5-um-wavelength Mach-Zehnder modulators utilizing the electrorefractive effect in InGaAsP/InP symmetric, uncoupled semiconductor quantum-wells. Modulators with 1-cm-long, lumped-element electrodes are found to have a push-pull Vpi of 0.9V (Vpi*L = 9 V-mm) and 18-dB fiber-to-fiber insertion loss (Tmax/Vpi = 0.018). Fabry-Perot cutback measurements reveal a waveguide propagation loss of 7 dB/cm and a waveguide-to-fiber coupling loss of 5 dB/facet. The relatively high propagation loss results from a combination of below-bandedge absorption and scattering due to waveguide-sidewall roughness. Analyses show that most of the coupling loss can be eliminated though the use of monolithically integrated inverted-taper optical-mode converters, thereby allowing these modulators to exceed the performance of commercial LiNbO3 modulators (Tmax/Vpi ~ 0.1). We also report the analog modulation characteristics of these modulators.

Citation Download Citation

Paul W. Juodawlkis, Frederick J. O'Donnell, Robert J. Bailey, Jason J. Plant, Kevin G. Ray, Douglas C. Oakley, Antonio Napoleone, Michael R. Watts, and Gary E. Betts "InGaAsP/InP quantum-well electrorefractive modulators with sub-volt Vpi", Proc. SPIE 5435, Enabling Photonic Technologies for Aerospace Applications VI, (3 August 2004); https://doi.org/10.1117/12.546786

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available