A fast CMOS array imager for nanosecond light pulse detection in accumulation mode

Chantal-V. Zint; Wilfried Uhring; Bruno Casadei; Jean-P. Le Normand; Frederic Morel; Yann Hu

doi:10.1117/12.545031

10 September 2004 A fast CMOS array imager for nanosecond light pulse detection in accumulation mode

Chantal-V. Zint, Wilfried Uhring, Bruno Casadei, Jean-P. Le Normand, Frederic Morel, Yann Hu

Proceedings Volume 5457, Optical Metrology in Production Engineering; (2004) https://doi.org/10.1117/12.545031
Event: Photonics Europe, 2004, Strasbourg, France

Abstract

We designed a camera based on a fast CMOS APS imager for high speed optical detection which produces images simi-larly as a streak camera. This imager produces the intensity information I as function of one spatial dimension and time (I=f(x,t)) from one frame with two spatial dimensions. The time sweeping is obtained by delaying successively the integration phase for each pixel of the same row. For the first FAMOSI (Fast MOs Imager) prototype the start of in-tegration is given by the camera itself. This signal is injected to a laser trigger. This laser emits a 10 nanoseconds light pulse onto the sensor. The temporal evolution of the light pulse is then resolved by the camera with a resolution of 800 ps. In single shot, the maximum dynamic of the camera is estimated to 64 dB and is limited by the readout noise. We decide to work in accumulation mode in order to increase the signal to noise ratio of the camera. But the high laser trigger (about 20 ns rms) does not allow accumulation of several optical events without a large spreading. The camera has been modified in order to be triggered by an external signal delivered by a trigger unit. In this new configuration the laser emit pulses at a repetition rate of 50 Hz. A photodiode detect a part of the laser pulse and generate the trigger signal for FAMOSI. The laser pulse is delayed with an optical fibre before being directed to the camera. The trigger jitter obtained is then less than 100 ps and allows accumulation without significant loss of the temporal resolution. With accumulation the readout noise is attenuated by a √N factor. Then with N = 1000 accumulations, the dynamics approach 93 dB. This allows the camera to work similarly as a synchroscan streak camera and then to observe weak signal.

Citation Download Citation

Chantal-V. Zint, Wilfried Uhring, Bruno Casadei, Jean-P. Le Normand, Frederic Morel, and Yann Hu "A fast CMOS array imager for nanosecond light pulse detection in accumulation mode", Proc. SPIE 5457, Optical Metrology in Production Engineering, (10 September 2004); https://doi.org/10.1117/12.545031

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available