Paper
22 July 2004 Broadband light source for the third transmission window
Author Affiliations +
Proceedings Volume 5484, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments II; (2004) https://doi.org/10.1117/12.568915
Event: Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments II, 2003, Wilga, Poland
Abstract
Broadband fiber ASE light test source in third transmission window designated for high spectral resolution Bragg gratings measurements was realized. It was achieved by the use of erbium doped fiber in the ring laser configuration with the beam splitter made in fused taper technology. The fiber and EDFA properties were measured to optimize the fiber length for maximum amplification. System was pumped by 110 mW 980 nm laser diode. The measured ASE output power was 12 dB better than in the reference SLED source in 1520- 1550 nm range.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Pienkowski and Kazimierz P. Jedrzejewski "Broadband light source for the third transmission window", Proc. SPIE 5484, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments II, (22 July 2004); https://doi.org/10.1117/12.568915
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Optical amplifiers

Erbium

Optical filters

Light sources

Fiber amplifiers

Superluminescent sources

RELATED CONTENT


Back to Top