Translator Disclaimer
29 September 2004 Metrology concept design of the GAIA basic angle monitoring system
Marielle van Veggel, Rob Vink, Nick Rosielle, Henk Nijmeijer, Arno A. Wielders
Author Affiliations +
The GAIA satellite, scheduled for launch in 2010, will make a highly accurate map of our Galaxy. It will measure the position of stars with an accuracy of 50 prad using two telescopes, which are positioned under a 'basic' angle between the the lines-of-sight of the telescopes of 106°. With a Basic Angle Monitoring system, variations of this angle will be measured with 5 prad accuracy, to correct for these variations on the measured position of stars. A conceptual design of the Basic Angle Monitoring system is presented. Two pairs of parallel laser bundles are sent to the telescopes, which create two interference patterns. If the basic angle varies, the interference patterns will shift. The optical design is such that the rotation of one pair of beams with respect to the other pair, does not affect the measured basic angle. The position stability requirement of the mirrors is a maximum shift of 1 pm in 6 hours. For material stability and good thermal and mechanical properties, Silicon Carbide has been chosen. The structural design is such that the design is as much monolithic as possible. The alignment is performed along the horizontal plane with external and removable alignment mechanisms. The components are locked by adhesives.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marielle van Veggel, Rob Vink, Nick Rosielle, Henk Nijmeijer, and Arno A. Wielders "Metrology concept design of the GAIA basic angle monitoring system", Proc. SPIE 5495, Astronomical Structures and Mechanisms Technology, (29 September 2004);

Cited by 2 scholarly publications.

SiC challenging parts for GAIA
Proceedings of SPIE (November 20 2017)
A new concept in telescope design SIC as the only...
Proceedings of SPIE (April 03 2018)
Innovative slicer design and manufacturing
Proceedings of SPIE (July 06 2006)
Realization of the MIDI cold optics
Proceedings of SPIE (February 21 2003)
Gaia basic angle monitoring system
Proceedings of SPIE (September 21 2012)

Back to Top