29 September 2004 AAO2: a general purpose CCD controller for the AAT
Author Affiliations +
Abstract
The Anglo-Australian Observatory has developed a 2nd generation optical CCD controller to replace an earlier controller used now for almost twenty years. The new AAO2 controller builds on the considerable experience gained with the first controller, the new technologies now available and the techniques developed and successfully implemented in AAO's IRIS2 detector controller. The AAO2 controller has been designed to operate a wide variety of detectors and to achieve as near to detector limited performance as possible. It is capable of reading out CCDs with one, two or four output amplifiers, each output having its own video processor and high speed 16-bit ADC. The video processor is a correlated double sampler that may be switched between low noise dual slope integration or high speed clamp and sample modes. Programmable features include low noise DAC biases, horizontal clocks with DAC controllable levels and slopes and vertical clocks with DAC controllable arbitrary waveshapes. The controller uses two DSPs; one for overall control and the other for clock signal generation, which is highly programmable, with downloadable sequences of waveform patterns. The controller incorporates a precision detector temperature controller and provides accurate exposure time control. Telemetry is provided of all DAC generated voltages, many derived voltages, power supply voltages, detector temperature and detector identification. A high speed, full duplex fibre optic interface connects the controller to a host computer. The modular design uses six to ten circuit boards, plugged in to common backplanes. Two backplanes separate noisy digital signals from low noise analog signals.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lew Waller, Lew Waller, John Barton, John Barton, Don Mayfield, Don Mayfield, Jason Griesbach, Jason Griesbach, } "AAO2: a general purpose CCD controller for the AAT", Proc. SPIE 5499, Optical and Infrared Detectors for Astronomy, (29 September 2004); doi: 10.1117/12.550293; https://doi.org/10.1117/12.550293
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

IDSAC-IUCAA digital sampler array controller
Proceedings of SPIE (July 26 2016)
SEDHI a new generation of detection electronics for earth...
Proceedings of SPIE (November 20 2017)
The CCD imaging systems for DEIMOS
Proceedings of SPIE (March 06 2003)
New developments for detector controllers at NOAO
Proceedings of SPIE (July 19 2010)

Back to Top