29 September 2004 Single-sided CZT strip detectors
Author Affiliations +
Abstract
We report progress in the study of thick CZT strip detectors for 3-d imaging and spectroscopy and discuss two approaches to device design. We present the spectroscopic, imaging, detection efficiency and response uniformity performance of prototype devices. Unlike double-sided strip detectors, these devices feature both row and column contacts implemented on the anode surface. This electron-only approach circumvents problems associated with poor hole transport in CZT that normally limit the thickness and energy range of double-sided strip detectors. These devices can achieve similar performance to pixel detectors. The work includes laboratory and simulation studies aimed at developing compact, efficient, detector modules for 0.05 to 1 MeV gamma radiation measurements. The low channel count strip detector approach can significantly reduce the complexity and power requirements of the readout electronics. This is particularly important in space-based coded aperture or Compton telescope instruments requiring large area, large volume detector arrays. Such arrays will be required for NASA's Black Hole Finder Probe (BHFP) and Advanced Compton Telescope (ACT).
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John R. Macri, John R. Macri, Burcin Donmez, Burcin Donmez, Mark Widholm, Mark Widholm, Louis-Andre Hamel, Louis-Andre Hamel, Manuel Julien, Manuel Julien, Tomohiko Narita, Tomohiko Narita, James Macri Ryan, James Macri Ryan, Mark L. McConnell, Mark L. McConnell, } "Single-sided CZT strip detectors", Proc. SPIE 5501, High-Energy Detectors in Astronomy, (29 September 2004); doi: 10.1117/12.551958; https://doi.org/10.1117/12.551958
PROCEEDINGS
10 PAGES


SHARE
Back to Top