22 June 2004 Detection of inhomogeneities in a metal cylinder using ESPI and 3D pulsed digital holography
Author Affiliations +
Proceedings Volume 5503, Sixth International Conference on Vibration Measurements by Laser Techniques: Advances and Applications; (2004) https://doi.org/10.1117/12.579563
Event: Sixth International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, 2004, Ancona, Italy
Abstract
ESPI and 3D pulsed Digital Holography have been applied to detect inhomogeneities inside a metal cylinder. A shaker was employed to produce a mechanical wave that propagates through the inner structure of the cylinder in such a way that it generates vibrational resonant modes on the cylinder surface. An out of plane ESPI optical sensitive configuration was used to detect vibrational resonant modes. A 3D multi-pulse digital holography system was used to obtain quantitative deformation data of the dynamically moving cylinder. The local decrease in structural stiffness inside the cylinder due to an inhomogeneity produces an asymmetry in the resonant mode shape. Results show that the inhomogeneity produces an asymmetry in its vibrational resonant modes. The method may be reliably used to study and compare data from inside homogeneous and inhomogeneous solid materials.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tonatiuh Saucedo-Anaya, Tonatiuh Saucedo-Anaya, Fernando Mendoza Santoyo, Fernando Mendoza Santoyo, Carlos Perez-Lopez, Carlos Perez-Lopez, Manuel de la Torre Ibarra, Manuel de la Torre Ibarra, } "Detection of inhomogeneities in a metal cylinder using ESPI and 3D pulsed digital holography", Proc. SPIE 5503, Sixth International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, (22 June 2004); doi: 10.1117/12.579563; https://doi.org/10.1117/12.579563
PROCEEDINGS
5 PAGES


SHARE
RELATED CONTENT

Forensics for flatbed scanners
Proceedings of SPIE (February 26 2007)
Deformation measurement by 2D speckle correlation
Proceedings of SPIE (February 14 1993)
Mechanical properties of metal honeycomb sandwich panel
Proceedings of SPIE (August 25 2009)

Back to Top