Paper
20 October 2004 High CRI phosphor blends for near-UV LED lamps
Emil Radkov, Anant Setlur, Zena Brown, James Reginelli
Author Affiliations +
Abstract
Currently, the highest color rendering index (CRI) value obtained in commercially available LED devices is around 90. This falls short of the CRI values typical for incandescent lamps (defined at 100). Similarly, the commercially available LEDs for higher color temperature have CRI values of 65-85, well below the theoretical maximum of 100. New phosphor blends are proposed for use with LED chips emitting in the 350-450 nm range. The application of such blends can afford CRI values greater than 95, over the entire range of color temperatures of interest for general illumination (2500K - 8000K). In some cases, the CRI values approach the theoretical maximum of 100. LED based lamps with a steady state performance of 23 LPW and 25 lumens per chip at 3000K, with a general CRI (Ra) of 97 and a mean CRI (R1-R14) of 96 are demonstrated.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Emil Radkov, Anant Setlur, Zena Brown, and James Reginelli "High CRI phosphor blends for near-UV LED lamps", Proc. SPIE 5530, Fourth International Conference on Solid State Lighting, (20 October 2004); https://doi.org/10.1117/12.565832
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Lamps

Near ultraviolet

Temperature metrology

Ultraviolet radiation

Light sources

Manganese

Back to Top