22 October 2004 Annealing behavior of vanadium oxide films prepared by modified ion-beam-enhanced deposition
Author Affiliations +
Abstract
Different annealing conditions were adopted to anneal the vanadium oxide films prepared by modified Ion Beam Enhanced Deposition (IBED) method. An X-Ray Diffraction (XRD) was used to analyze the orientation of the IBED films and the resistance was tested with temperature change to measure the Temperature Coefficient of Resistance (TCR). Experiments indicated that there existed a critical temperature for crystallization of VO2, which changed with the different deposition conditions of the IBED method. It is very difficult to obtain VO2 structure if the annealing temperature was lower than the critical temperature. If the temperature is much higher than the critical temperature or annealing time is too long, the valence of vanadium in VO2 film will easily reduce from 4 to low value. The TCR of the IBED VO2 polycrystalline films annealed in appropriate condition could reach higher than 4%/K.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jinhua Li, Jinhua Li, Ningyi Yuan, Ningyi Yuan, Jiansheng Xie, Jiansheng Xie, } "Annealing behavior of vanadium oxide films prepared by modified ion-beam-enhanced deposition", Proc. SPIE 5564, Infrared Detector Materials and Devices, (22 October 2004); doi: 10.1117/12.561411; https://doi.org/10.1117/12.561411
PROCEEDINGS
6 PAGES


SHARE
Back to Top