8 December 2004 Disassembly for valorization in conceptual design
Author Affiliations +
Proceedings Volume 5583, Environmentally Conscious Manufacturing IV; (2004) https://doi.org/10.1117/12.580434
Event: Optics East, 2004, Philadelphia, Pennsylvania, United States
Abstract
The valorization rate improvement depends on the product disassembly characteristics. So, researchers develop and implement the Design for Disassembly (DfD) methodology to increase the valorization. The design process of technical products is critical to define the End of Life (EoL) disassembly characteristics of a product. It is the reason why several tools have been developed to evaluate the product disassembly at the end of the design process, when all product characterizations are defined. Nevertheless, it appears that the product disassembly improvement cannot be possible without a real redesigning of the product. In fact, all the existing tools don’t take into account the influence of design parameters on the disassembly results; they focus on the future disassembly process. In previous studies, we have shown that the conceptual design is the most important phase to integrate disassembly constraints in design process. But, this design phase is not addressed by current approach of DfD. We also note that a systematic methodology, which incorporates disassembly evaluation earlier in a design process, is absent. In this paper, we present our proposition concerning a methodological approach to design product easy to disassemble. In our approach, we use a Conceptual Disassembly Model (CDM) to help designers to consider disassembly. A case study is presented to understand the approach and to illustrate our purpose.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nizar Haoues, Nizar Haoues, Daniel Froelich, Daniel Froelich, Peggy Zwolinski, Peggy Zwolinski, } "Disassembly for valorization in conceptual design", Proc. SPIE 5583, Environmentally Conscious Manufacturing IV, (8 December 2004); doi: 10.1117/12.580434; https://doi.org/10.1117/12.580434
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

Method of equivalent element in parametric CAD
Proceedings of SPIE (March 22 1996)
Optimizing product life cycle processes in design phase
Proceedings of SPIE (February 11 2002)
Three-dimensional shape modeler
Proceedings of SPIE (January 09 1997)
Issues on constraint-based design approaches
Proceedings of SPIE (March 22 1996)

Back to Top