Paper
2 December 1985 Polymer Glazings for Silver Mirrors
H. H. Neidlinger, Paul Schissel
Author Affiliations +
Abstract
This paper reports on our evaluation and modification of polymeric glazings to protect silver mirrors. The mirrors were made using Corning 7809 glass as a substrate onto which a thin silver film is deposited. The modified polymeric films are then cast from solution onto the silver. The mirrors were characterized by measuring the hemispherical reflectance and the specular reflectance at 660 nm and selected acceptance angles (7.5 mrad or 3.5 mrad). The mirrors were exposed to environmental degradation using accelerated weathering devices and outdoor exposure. Empirical evidence has demonstrated that poly-methylmethacrylate is a stable polymer in a terrestrial environment, but the polymer does not provide adequate protection for the silver reflector. The crucial role in degradation played by ultraviolet (UV) light is shown by several experimental results. We have demonstrated that UV stabilizers added to the polymer improve the weatherability of mirrors. The relative effectiveness of different stabilizers will be discussed in terms of the weathering modes, retention of optical properties, and effectiveness of the additives. The process for silver deposition influences the reflectance of silver mirrors, and the optical properties depend on subtle relationships between the metallization and the dielectric (polymeric) films that are in contact with the silver.
© (1985) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. H. Neidlinger and Paul Schissel "Polymer Glazings for Silver Mirrors", Proc. SPIE 0562, Optical Materials Technology for Energy Efficiency and Solar Energy Conversion IV, (2 December 1985); https://doi.org/10.1117/12.966294
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silver

Mirrors

Polymers

Ultraviolet radiation

Reflectivity

Polymethylmethacrylate

Polymer thin films

RELATED CONTENT

Specularity and Stability of Silvered Polymers
Proceedings of SPIE (December 02 1985)
Silvered low-iron glass: experience and new developments
Proceedings of SPIE (November 25 1992)
Design Considerations For Long-Lived Glass Mirrors For Space
Proceedings of SPIE (February 23 1987)
Durability Of Silvered Polymer Mirrors
Proceedings of SPIE (November 12 1987)

Back to Top