Translator Disclaimer
20 January 2005 Finite element analysis of laser-diode heat emission and design of PI fuzzy cooling system
Author Affiliations +
Abstract
In order to realize the coupling of the crystal spectrum line, the wavelength output by the laser-diode must be adjusted to be accordant with the peak value absorbed by laser crystal in the solid laser of the laser-diode pump. In this paper, the finite element analysis (FEA) of the heat emission of the to-3 encapsulated laser-diode was researched and an accurate PI+Fuzzy temperature control system was developed. The refrigeration and the accurate temperature control of the high-power laser-diode was realized by the semiconductor refrigerator. Combined with fussy control and PI control, a full solid refrigerator of the laser-diode was developed. AT89C51 MCU and CRI[1] fussy control arithmetic were used in this system. So the system has high temperature control precision and little chatting. The rate of change of the optical power peak value output by the laser-diode was less than 1%.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fusheng Yu, Xiaoqin Shen, Changlin Leng, and Zhi Li "Finite element analysis of laser-diode heat emission and design of PI fuzzy cooling system", Proc. SPIE 5628, Semiconductor Lasers and Applications II, (20 January 2005); https://doi.org/10.1117/12.576528
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

A 3000W 808nm QCW G-stack semiconductor laser array
Proceedings of SPIE (February 03 2015)
PCM cooling system of high-power lasers
Proceedings of SPIE (June 17 2019)
Growth of highly doped Nd:YAG laser crystals
Proceedings of SPIE (April 03 2000)
10 W CW blue violet diode laser array on the...
Proceedings of SPIE (February 08 2012)

Back to Top