13 January 2005 Application of fiber laser used in the field of stent cutting and micromachining
Author Affiliations +
Abstract
Based on the comparison of traditional laser and fiber laser cutting system, a fiber laser based micro-machining system is designed. The main modules of the micro-machining system and the key techniques are analyzed and the corresponding solution is proposed. In particular, the driving, control and modulation system are focused on, in which an SOC system is built up, and the corresponding hardware and software are described in detail. The pulse width and frequency modulation are achieved with software, by setting the related parameters via keyboard. The power, pulse length and pulse frequency can be tunable in our modulation system, which can meet the different laser requirement in various kinds of stents cutting and micro-machining.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weiping Liu, Weichong Du, Jianhong Liao, "Application of fiber laser used in the field of stent cutting and micromachining", Proc. SPIE 5629, Lasers in Material Processing and Manufacturing II, (13 January 2005); doi: 10.1117/12.573211; https://doi.org/10.1117/12.573211
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Laser Cutting Market
Proceedings of SPIE (March 16 1989)
Fiber laser for micro-cutting of metals
Proceedings of SPIE (July 03 2003)
Devices for CO2-laser system in multilayer sheet cutting
Proceedings of SPIE (March 08 1995)
Laser system for micromachining of the materials
Proceedings of SPIE (January 23 2007)

Back to Top