13 January 2005 Experimental study on plasma inside the keyhole in deep penetration laser welding
Author Affiliations +
Abstract
Deep penetration laser welding is associated with violent plasma generation characterized by high charge densities. Plasma resides both outside and inside the keyhole, known as plasma plume and keyhole plasma, respectively. Plasma plume outside the keyhole has been studied extensively due to its convenient observation; however, very little work has concentrated on the analysis of the keyhole plasma. In this article, a specially designed setup was used to take firsthand measurements of the light emission of the keyhole plasma in deep penetration laser welding aluminum films clamped in between two pieces of GG17 glass that we called it a “sandwich” sample, triumphantly eliminating the impact of the plasma plume covering the keyhole on the observation of keyhole plasma. Results of spectroscopic measurements of both plasma plume and keyhole plasma under welding conditions were obtained with orthogonal experimental design. It was shown that keyhole plasma had considerable effects on the energy transfer efficiency of the incident laser beam to the material, exhibiting various melting width and depth; deeper welding depth as well as lower temperature of the keyhole plasma was obtained when decreasing the densities of the keyhole plasma by reducing the thickness of aluminum films.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yi Zhang, Lijun Li, Gang Zhang, "Experimental study on plasma inside the keyhole in deep penetration laser welding", Proc. SPIE 5629, Lasers in Material Processing and Manufacturing II, (13 January 2005); doi: 10.1117/12.574813; https://doi.org/10.1117/12.574813
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

Picosecond laser welding of optical to metal components
Proceedings of SPIE (March 04 2016)
Lasing On Inert-Gas Mixtures With Optical Break-Down Pumping
Proceedings of SPIE (October 21 1986)
Glass welding technology using ultra short laser pulses
Proceedings of SPIE (February 21 2011)
Thermal coupling inside the keyhole during welding process
Proceedings of SPIE (September 07 1994)
Energy balance in high-power CO2 laser welding
Proceedings of SPIE (October 01 1991)

Back to Top