Translator Disclaimer
13 January 2005 Study of YAG laser cutting process with titanium alloy sheet
Author Affiliations +
In this paper, the experiments of cutting titanium alloy sheet with Nd:YAG pulsed laser were carried out and the effects of the type of shielding gases, gas pressure and laser parameters on kerf width, surface quality and metamorphic layer thickness were studied. The results showed that compressed air is suitable for laser cutting of titanium alloy, the Argon gas does better, while Oxygen gas has undesirable effects; the metamorphic layer is thicker with compressed air as assisted gas in comparison to that with Argon gas; the kerf width increases as the power density, pulse frequency and pulse width increase; higher cutting speed can be applied and the cutting quality is improved when the pulse frequency is increased.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Litao Qi, Yang Wang, and ShanJin Lv "Study of YAG laser cutting process with titanium alloy sheet", Proc. SPIE 5629, Lasers in Material Processing and Manufacturing II, (13 January 2005);


Laser processing of slate tiles
Proceedings of SPIE (August 13 2001)
Process gases for laser welding
Proceedings of SPIE (August 17 1997)
Laser Selection For Drilling
Proceedings of SPIE (December 31 1986)

Back to Top