14 February 2005 Spectrally-coded multiplexing in a strain sensor system based on carrier-modulated fiber Bragg gratings
Author Affiliations +
Abstract
In order to increase the number of channels available to a grating based strain sensor system specialised gratings were designed that would allow the sensor system to be able to distinguish between a number of gratings located in the one WDM channel independently of the amount by which they overlap each other in the wavelength domain. Distinguishing between gratings is achieved by inscribing a carrier frequency in the grating spectrum, so that each grating can be addressed in the Fourier domain via the spectral information centred around the inscribed carrier frequency. Tests performed on the gratings successfully show the ability to distinguish between three spectrally overlapping gratings. The calculated value for Young's modulus, 72+/-3GPa, was found to be in keeping with the standard value of 70.3GPa for fused silica.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul Childs, Paul Childs, Trevor Whitbread, Trevor Whitbread, Gang-Ding Peng, Gang-Ding Peng, } "Spectrally-coded multiplexing in a strain sensor system based on carrier-modulated fiber Bragg gratings", Proc. SPIE 5634, Advanced Sensor Systems and Applications II, (14 February 2005); doi: 10.1117/12.580641; https://doi.org/10.1117/12.580641
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Serial FBG sensor network allowing overlapping spectra
Proceedings of SPIE (May 29 2016)
Multiplexing fiber Bragg grating sensors
Proceedings of SPIE (December 31 1991)
Research on the fire alarming system of fiber grating
Proceedings of SPIE (October 04 2007)
Multiplexed fiber optic sensors
Proceedings of SPIE (March 04 1993)
Multiplexed FBG sensors and their applications
Proceedings of SPIE (November 10 1999)

Back to Top