Paper
9 February 2005 Influence of the bandwidth of an acquisition system on the trap stiffness measurement
Zan Gong, Hongtao Chen, Shenghua Xu, Yinmei Li, Liren Lou
Author Affiliations +
Abstract
The high precision calibration of optical trap stiffness is the foundation of the weak force measurement in optical tweezers system. And the accuracy of the trap stiffness measurement is limited by the bandwidth of the acquisition system. In this article, such an influence is analyzed and discussed. First, the power spectrum of the thermal motion of a trapped bead is analyzed and the true trap stiffness is compared with the stiffness measured by a limited bandwidth acquisition system. Then the stiffness measuring process is simulated using Monte Carlo method when thermal motion analysis method is used to measure the trap stiffness. It is demonstrated that the influence of the bandwidth is related to the trap stiffness and bead diameter. And that the measured trap stiffness is greater than the true value is also demonstrated when the bandwidth of the acquisition system is not sufficient.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zan Gong, Hongtao Chen, Shenghua Xu, Yinmei Li, and Liren Lou "Influence of the bandwidth of an acquisition system on the trap stiffness measurement", Proc. SPIE 5635, Nanophotonics, Nanostructure, and Nanometrology, (9 February 2005); https://doi.org/10.1117/12.569877
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical tweezers

Motion analysis

Monte Carlo methods

Numerical modeling

Motion measurement

Biology

Nanotechnology

Back to Top