28 February 2005 Optical threshold logic analog-to-digital converters using self electro-optic effect devices
Author Affiliations +
A novel 2-bit optical-input optical-output analog-to-digital converter (ADC) is demonstrated in self electro-optic device (SEED) technology using a threshold logic technique. The threshold gate was constructed using a resistor-SEED (R-SEED) which is composed of a large value resistor and a SEED area of 500 um x 500 um. Each gate operates as a majority function that has a threshold level controlled by a fixed optical input. The ADC was constructed using two R-SEED gates operating at wavelength of 846 nm. The test bench set-up operates at 100 Hz. However, as the proposed architecture is scalable, it can operate at much higher speeds and generate larger number of bits. This architecture is only limited by the switching speed of the SEED and propagation delay through each threshold gate.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tony Sarros, Said F. Al-Sarawi, Peter Celinski, Kerry A. Corbett, "Optical threshold logic analog-to-digital converters using self electro-optic effect devices", Proc. SPIE 5649, Smart Structures, Devices, and Systems II, (28 February 2005); doi: 10.1117/12.582318; https://doi.org/10.1117/12.582318


High-performance computing based on spin-diode logic
Proceedings of SPIE (August 28 2014)
Use Of A Micro Channel Spatial Light Modulator In A...
Proceedings of SPIE (February 08 1988)
Negative conductance in HgCdTe photodiodes
Proceedings of SPIE (June 10 1999)
Resonant tunneling devices and circuits
Proceedings of SPIE (April 19 1996)
Logic Based Spatial Light Modulators
Proceedings of SPIE (May 03 1988)

Back to Top