Paper
28 February 2005 Ultrasonic standing wave generator for a smart particle separating device
Author Affiliations +
Proceedings Volume 5649, Smart Structures, Devices, and Systems II; (2005) https://doi.org/10.1117/12.582506
Event: Smart Materials, Nano-, and Micro-Smart Systems, 2004, Sydney, Australia
Abstract
This paper presents the theory, design, and evaluation of a smart device for the enhanced separation of particles mixed in fluid. The smart device takes advantage of the ultrasonic standing wave, which was generated by the operation of a piezoceramic PZT patch installed in the smart device. The details of the device design including the electro-acoustical modelling for separation and PZT transducer are described at first. Based on this design, the separation device was fabricated and evaluated. In the experiments, an optical camera with a zoom lense was used to monitor the position of interested particles within the separation channel layer in the device. The electric impedance of the PZT patch bonded on the separation device was measured. The device shows a strong levitation force against 50μm diameter sand particles mixed with water at the separation channel in the device. Experimetal results also showed that the device can levitate both heavy and light settled sand particles clouds on the bottom to the nodal lines of the generated standing wave field in the separation channel.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dong-Jin Yoon, Young-Sup Lee, and Jaehwa Kwon "Ultrasonic standing wave generator for a smart particle separating device", Proc. SPIE 5649, Smart Structures, Devices, and Systems II, (28 February 2005); https://doi.org/10.1117/12.582506
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Particles

Ferroelectric materials

Ultrasonics

Clouds

Modeling

Transducers

Acoustics

Back to Top