8 October 2004 Fabrication of microlens using CO2 laser
Author Affiliations +
Proceedings Volume 5662, Fifth International Symposium on Laser Precision Microfabrication; (2004) https://doi.org/10.1117/12.596304
Event: Fifth International Symposium on Laser Precision Microfabrication, 2004, Nara, Japan
Abstract
Microlenses were formed directly on a surface of a glass plate by using CO2 laser. This method has the merit of complete dry processing and presents simple way of microlens fabrication. We discuss about the formation process and mechanism through the characterization of irradiation parameters and the glass composition. When the surface of a glass plate is heated locally to a working point of the glass material by a focused CO2 laser beam, a microlens is formed owing to surface tension. It was found possible to fabricate microlens easily placed at different focal position by controlling a laser power and an irradiation time. The volume of the fabricated microlens was found to be dependent on laser irradiation energy (laser power x irradiation time) and irradiated position. When a Corning 7059 glass plate was used, a convex microlens was obtained at the energy density smaller than ca. 100 (μJ/μm2).
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroshi Murotani, Hiroshi Murotani, Kenji Nakamoto, Kenji Nakamoto, Hideo Fukumoto, Hideo Fukumoto, Moriaki Wakaki, Moriaki Wakaki, } "Fabrication of microlens using CO2 laser", Proc. SPIE 5662, Fifth International Symposium on Laser Precision Microfabrication, (8 October 2004); doi: 10.1117/12.596304; https://doi.org/10.1117/12.596304
PROCEEDINGS
5 PAGES


SHARE
Back to Top