7 March 2005 Optoelectronic library for color sensor design
Author Affiliations +
Color imaging systems still use a combination of conventional photo-detectors and RGB optical filters for color measurement. This entails many limitations to the color sensor performances. We reported that buried junction color detectors give good alternatives to overcome these limitations. However, successful design of color sensors using these detectors requires an accurate knowledge of their behaviors. Unfortunately, circuit simulators do not provide models for these devices. In order to make the designer task more flexible, an optoelectronic library is developed under CADENCE design tool. It consists of some optoelectronic elements such as Buried Double pn Junction (BDJ) detector and a set of optical sources. This allows the designer to choose an optical stimulus with a specific spectral distribution and also to select the total power incident on the BDJ surface. The library is obtained by implementing, in Spectre simulator, the behavioral models of the optoelectronic elements. The models are written using Verilog-A language. Simulations of the BDJ spectral response and dark currents give a good agreement with experimental data. We also note the absence of convergence errors or mathematical faults during DC and transient simulations of active pixel sensor architectures. These results confirm the robustness of the optoelectronic library.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fadhila Haned, Fadhila Haned, Mohamed Ben Chouikha, Mohamed Ben Chouikha, Andre Baguenier Desormeaux, Andre Baguenier Desormeaux, Georges Alquie, Georges Alquie, "Optoelectronic library for color sensor design", Proc. SPIE 5677, Sensors and Camera Systems for Scientific and Industrial Applications VI, (7 March 2005); doi: 10.1117/12.587642; https://doi.org/10.1117/12.587642

Back to Top