24 February 2005 Positional and orientational referencing of multiple light sectioning systems for precision profile measurement
Author Affiliations +
Proceedings Volume 5679, Machine Vision Applications in Industrial Inspection XIII; (2005); doi: 10.1117/12.586501
Event: Electronic Imaging 2005, 2005, San Jose, California, United States
Abstract
Precision rolled strips are often intermediate products in the manufacturing of blades. In such cases the shape and size of these strips are essential to the functionality and quality of the blade and cutting workpiece. Although precision strips are normally produced in heavily automated rolling mills, their size and shape are still inspected manually with profile gauges and microscopes. In this paper we present a measurement setup with multiple light-sectioning systems, which is suitable for the inspection of all sides of a profiled strip. It consists of three measurement heads, which are used to inspect the upper side, the lower side and the back of the blade. The heads are calibrated individually; the focus of the work here is to determine the relative position and orientation of the heads with respect to each other. The first approach has been developed to reference two or more measurement heads. The calculation of the required transformations is based on the rotation of a suitable target. Due to the small depth of field, the location of the rotation axis must be pre-adjusted very precisely. To improve the accuracy and to simplify the process, a second referencing method was developed. The required target was manufactured by means of a 5-axis high speed milling machine and features a thickness tolerance of less than 1 micron. Both the referencing method and target are presented. Additionally, we demonstrate the all-side inspection of a blade. It will be shown that the approaches allow a robust and flexible referencing of multiple measurement heads to each other.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mark Tratnig, Helmut Hlobil, Johann Reisinger, Paul L. O'Leary, "Positional and orientational referencing of multiple light sectioning systems for precision profile measurement", Proc. SPIE 5679, Machine Vision Applications in Industrial Inspection XIII, (24 February 2005); doi: 10.1117/12.586501; https://doi.org/10.1117/12.586501
PROCEEDINGS
12 PAGES


SHARE
KEYWORDS
Head

Inspection

Calibration

Cameras

Glasses

Manufacturing

Laser systems engineering

RELATED CONTENT


Back to Top