12 April 2005 The new technology of the materials process: microvia formation by CO2 laser drilling machine
Author Affiliations +
Abstract
The purpose of this paper is the microvia results of different materials (RCC, FR4 and Cu) using CO2 laser drilling machine at the wavelength of 10600 nm. We investigated the mechanism of this process with CO2 laser and the microvia results of different materials. The microvia with a diameter up to 150 microns through laser drilling are presented. In this paper we report the results of a dielectric material such as the RCC and FR4 which used the different parameter of laser. In addition, the high power required for drilling copper foil compared to the resin material is due to the low absorption and high reflection of copper around 10600 nm wavelengths. We will present the method of the copper drilling based on a CO2 laser drilling machine system which used the low power.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ming-Fei Chen, Ming-Fei Chen, Yu-Pin Chen, Yu-Pin Chen, } "The new technology of the materials process: microvia formation by CO2 laser drilling machine", Proc. SPIE 5713, Photon Processing in Microelectronics and Photonics IV, (12 April 2005); doi: 10.1117/12.593087; https://doi.org/10.1117/12.593087
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Applying Lasers For Productivity And Quality
Proceedings of SPIE (August 04 1986)
State Of The Art In Laser Marking And Engraving
Proceedings of SPIE (December 31 1986)
The study of the acrylic material drilling used by the...
Proceedings of SPIE (September 19 2004)
Microvia formation with lasers
Proceedings of SPIE (September 11 2002)

Back to Top