22 January 2005 Standard semiconductor packaging for high-reliability low-cost MEMS applications
Author Affiliations +
Abstract
Microelectronic packaging technology has evolved over the years in response to the needs of IC technology. The fundamental purpose of the package is to provide protection for the silicon chip and to provide electrical connection to the circuit board. Major change has been witnessed in packaging and today wafer level packaging technology has further revolutionized the industry. MEMS (Micro Electro Mechanical Systems) technology has created new challenges for packaging that do not exist in standard ICs. However, the fundamental objective of MEMS packaging is the same as traditional ICs, the low cost and reliable presentation of the MEMS chip to the next level interconnect. Inertial MEMS is one of the best examples of the successful commercialization of MEMS technology. The adoption of MEMS accelerometers for automotive airbag applications has created a high volume market that demands the highest reliability at low cost. The suppliers to these markets have responded by exploiting standard semiconductor packaging infrastructures. However, there are special packaging needs for MEMS that cannot be ignored. New applications for inertial MEMS devices are emerging in the consumer space that adds the imperative of small size to the need for reliability and low cost. These trends are not unique to MEMS accelerometers. For any MEMS technology to be successful the packaging must provide the basic reliability and interconnection functions, adding the least possible cost to the product. This paper will discuss the evolution of MEMS packaging in the accelerometer industry and identify the main issues that needed to be addressed to enable the successful commercialization of the technology in the automotive and consumer markets.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kieran P. Harney, "Standard semiconductor packaging for high-reliability low-cost MEMS applications", Proc. SPIE 5716, Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS IV, (22 January 2005); doi: 10.1117/12.597110; https://doi.org/10.1117/12.597110
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Packaging of MEMS devices
Proceedings of SPIE (September 15 1995)
Reliability issues of COTS MEMS for aerospace applications
Proceedings of SPIE (August 18 1999)
Wafer capping of MEMS with fab-friendly metals
Proceedings of SPIE (January 19 2007)

Back to Top